How to Calculate the Tensile Coefficient of Stainless Steel
In fact, many times we are not concerned about the stretch of the tensile factor, in fact, this approach is not correct, why the concept of stretching coefficient, it is certainly the value of our val
Views：181 Release date：2016-10-30
Selection of drawing parts for automobile
(1) the production of tensile parts as far as possible the use of standard mold base, and norms of the type and specification of the mold frame on the decision of the type and specification of the nex
Views：258 Release date：2016-10-30
Design and Calculation of Main Parts of Drawing Die
1) drawing die gap
(1) the first drawing gap Z = 1.1t = 1.1mm
(2) The final deep drawing gap Z = 1.0t = 1.0mm
(3) rounded Z = 1.1t = 1.1mm
2) the fillet radius of the drawing die
(1) the
Views：222 Release date：2016-10-30
Total1 Page Page:1/1 PageHome pagePrevious page1Next pageLast page